Return to Directory

Revised Radar Display Mount

Bill Martinelli, Voyager, #11

 

(Click on picture for full size)

Radar Display Mount

The Swingup Radar mount was replaced with a NavPod pod and what I believe is an Edson tube mount. This was done by the previous owner.

Radar Display Mount

I removed the chart plotter from the navigation table and placed it below the radar using parts of the original aluminum mount and a couple of life ring box mounts.

Radar Display Mount

The small white object on the back of the pod is a bimini light I purchased from West Marine to light the cockpit table. I placed some aluminum tape inside the upper area of the light to block the light from going out the top and aims it down at the table area. I've also placed two of these units on our dodger rails to light the cockpit area. these lights are 12 volts and need to be wired into the battery system.

Radar Display Mount

Our wind indicator was removed from the front of the table and placed back by the radar along with our Master View ST80, hence the inclinometer filling the space.